Check your model of Laser Cutter in Lasercut 5.3

Lasercut5.3 is used on all our laser cutter models. You will need to ensure you have the correct model selected. To do this open Lasercut5.3.

Find the model identifier at the top of the opened program window. The above example shows the software for the BLACKNOSE A3 laser cutter. If your model is not a BLACKNOSE A3 you will need to run the appropriate BATCH FILE from the LASERCUT53 folder on the route of OS (C). Close Lasercut 5.3 program and located the LASERCUT53 folder.

The BATCHFILES are in alphabetical (not laser cutter size) order called:

• Lasercut 5.3 – Blacknose
• Lasercut 5.3 – Greyfin
• Lasercut 5.3 – Silvertail
• Lasercut 5.3 – Whitetooth

Double click on the appropriate batch file for your machine. You will see the following WARNING appear.

Click where is says “MORE INFO” clicking OK will NOT run the file. Once you have clicked MORE INFO next click RUN ANYWAY. This warning appears as a safeguard. Batch files are used to alter programs.

Open Lasercut 5.3 program.

You should now have the correct model shown at the top of the programme window. In this case the Greyfin A2.